Match the coil shape and diameter to the ferrous part. A close fit transfers energy efficiently.
Professional induction heating
Which iDuctor do I need?
Choose by part size, frequency of use and the heaviest job you regularly perform.
In practice
Start with the work, then choose the system
The highest wattage is not automatically the best choice. A compact system can be ideal for routine automotive fasteners, while larger parts and repeated heating benefit from more output.
All three product families are available with a Basic Kit and a Professional Kit. The Professional Kit adds a broader coil selection for technicians who meet different fastener sizes every day.
- W1200: compact 1200 W system for routine work
- W2000: 2000 W all-round workshop capacity
- W2300 Power+: 2300 W for demanding heavy work
- Basic or Professional Kit according to accessory needs
A controlled working method
Three questions narrow down the choice
Consider the largest parts you heat, how often the tool runs each day and whether you need a broad coil range immediately. Product compatibility is shown on each accessory and iDuctor page.
The correct coil, controlled heat and a short inspection make the difference.
Start with the lowest practical setting and monitor the part. Avoid unnecessary heating cycles.
Switch off before changing a coil, allow hot parts to cool and follow the instructions in the manual.
Compare the three iDuctor systems
Compare the three iDuctor systems
Choose the power level and kit that match your daily work. Each product page shows the compatible accessories.
Popular kits
Go straight to the right system
Three proven setups for day-to-day workshop work, heavier heating jobs and maximum output.
Professional
See kit
1200W system
iDuctor W1200 Professional Kit
The iDuctor W1200 Professional Kit adds an extended 8-coil set to the 1200-watt induction tool, giving workshops broader coverage for different bolt and nut sizes. It is built for safe, precise heating without an open flame.
Advanced+
See kit
2000W system
iDuctor W2000 120V
The iDuctor W2000 Basic Kit 120V is a higher-output induction heating kit for heavier workshop jobs. This dedicated 120-volt version uses the W2000 platform to loosen rusted ferrous parts safely and precisely without an open flame.
Ultra Power++
See kit
2300W Power+
iDuctor W2300 Power+ Kit
The iDuctor W2300 Power+ Kit is a high-output induction heating kit for heavier jobs. With 2300 watts of output, it safely loosens larger and heavier ferrous parts without an open flame and supports Flexcoils from 1100 mm up to 3500 mm.
Frequently asked questions
Should I always choose the most powerful model?
No. Choose enough capacity for your regular work. Size, weight, supply and accessory needs also matter.
Basic Kit or Professional Kit?
Choose Basic when the included essentials cover a defined task. Choose Professional when you want a wider coil range ready in the case.
Can I add accessories later?
Yes. Compatible coils and accessories can be ordered separately. Check the compatibility section before ordering.
More applications and advice
Need help choosing the right iDuctor?
Tell us what you heat, how often you use the tool and what power supply is available.